1. Log into the Partner Portal.
2. Go to Deployment -> Certification Forms. This will open the Certification Forms window, and provide a search function so that the sites may be easily located.
3. Sites can be searched for by specifying an Exhibitor and State.
-OR-
4. Sites can be searched for by specifying a Site Code or Site Name.
5. A list will be displayed of sites that matched the search criteria. Select the appropriate location by clicking on the site.
6. A window listing the certification status of the theatre will be displayed. Click the appropriate Auditorium box and select Edit Form.
7. The auditorium certification form will be displayed. Enter the Serial Number, Software Version, Hardware Version, IP address, and Firmware version of the projector.
NOTE: The lens details will not be filled in until installation.
NOTE: The Auditorium assets will vary by auditorium. If so, fill in any necessary blank fields relating to the additional equipment.
8. Scroll down to the Media Block section and enter the Serial Number, Firmware Version, IP Address, Software Version, and Hardware version of the Media Block.
9. Scroll down to the Other Auditorium Equipment section and enter the Serial Number, Firmware Version, IP Address, and Hardware Version of the Audio Device.
10. Once completed, click the Save button in the bottom left hand corner. If prompted to confirm, click OK/Yes.
11. In the bottom right hand corner, set the Certification Type to Staging Certification.
12. Click the Apply button in the bottom left hand corner. If prompted to confirm, click OK/Yes.
