1. Log into the Partner Portal.
2. Go to Deployment -> Certification Forms. This will open the Certification Forms window, and provide a search function so that the sites may be easily located.
3. Sites can be searched for by specifying an Exhibitor and State.
-OR-
4. Sites can be searched for by specifying a Site Code or Site Name.
5. A list will be displayed of sites that matched the search criteria. Select the appropriate location by clicking on the site.
6. A window listing the certification status of the theatre will be displayed. Click the Network box and select Edit Form.
7. The network certification form will be displayed. In the Central Asset Network Equipment section, enter the Serial Number and IP address of the network device.
8. The remaining fields (i.e. hardware and/or software versions) will vary by device. Fill in any additional open fields as needed for each piece of equipment.
NOTE: The Central Asset Network Equipment will vary by theatre. There may be multiple switches, routers, firewalls, or other equipment. If so, fill in any necessary blank fields relating to the additional equipment.
9. Scroll down to the Auditorium Network Equipment section and fill in the Serial Number, IP Address, and Software Version for each auditorium and their associated network devices.
NOTE: There may be additional equipment in the Auditorium Network Equipment section. If so, fill in any necessary blank fields relating to the additional equipment.
10. Once completed, click the Save button in the bottom left hand corner. If prompted to confirm, click OK/Yes.
11. In the bottom right hand corner, set the Certification Type to Staging Certification.
12. Click the Apply button in the bottom left hand corner. If prompted to confirm, click OK/Yes.
